Resetter Canon IP1880 for Windows 7
Resetter Canon IP1880 for Windows 7- Canon IP 1880 is a serial printer intended for the consumer (ordinary users). Compared to its predecessor the series IP 1700, IP 1880 has a striking difference in physical form. Clad in black and have a physical form rather fat. The resulting image quality is 4800 dpi, with its speed is 20 ppm for black and 16 ppm print to print warna.Dengan excess assets, suitable to be used by ordinary users. But behind the lead, there are some weaknesses that are very disturbing. The most complained by consumers is about Blinking-, Blinking usually occurs when the counters are installed on the printer has reached its maximum value
The maximum value itself is determined by the manufacturer. It seems counter created / installed as a reminder that the printer has been working according to the capacity of its maximum. However regrettable is often a new printer to print multiple pages (print) has been blinking
Meaning Blinking as a means to remind the performance of the printer is not working properly.
But still consumers who ultimately bothered. But this does not mean we can not get rid of blinking. Blinking can be removed by resetting the counter into the original value (before use) .For Canon 1880 there are 2 ways of eliminating blinking, first by hand, but only temporary (not permanent) and the second by using the software or software reseter. The main requirement for the printer meresepet you must have first reseternya software. To get clickable link download below
Resetter Canon IP1880 for Windows 7 Download
If reseternya software was downloaded, extract the software using winzip or winrar. then make sure it is not in the file attribute read-only status.
For a different Canon printer reset with reset epson printer, canon printer if the printer must be on service mode / manual reset / temporary. for IP 1880 way manual reset / temporernya as follows:
1. if blinking, squeeze the reset button for 5-10 seconds.
2. then open the printer cover
3. unplug all of its cartridges
4. plug again
5. Turn the printer off by pressing the power button
6. Turn again
7. See still blinking
If already not ngeblink again, we go into the next stage of running the software reseternya.
Oh yes before the printer and printer driver must be in a position to live or active
1. Go to the folder reseternya
2. Click GeneralTool.exe
3. then appear as follows:
Follow the steps:
1. Make sure the USB port is mounted
2. Click the Lock Release
3. checklist EEPROM Clear
4. Previous post first paper, then click Test Pattern 1
4. If the printer directly print process, usually Blinknya gone.
